Showing posts with label MECHANICAL. Show all posts
Showing posts with label MECHANICAL. Show all posts

Friday, 11 March 2011

Machinery Uses In Power Units

Power Units


         
         
 
 
 
 
 
   
 
 
 






Hydraulic Machinery Uses
 
 
 
 

Tuesday, 8 March 2011

History Of Bearing



Tapered bearings
Early Timken tapered roller bearing with notched rollers
The oldest instance of the bearing principle dates to the Egyptians when they used tree trunks under sleds. There are also Egyptian drawings of bearings used with hand drills.
The earliest recovered example of a bearing is a wooden ball bearing supporting a rotating table from the remains of the Roman Nemi ships in Lake Nemi, Italy. The wrecks were dated to 40 AD.
Leonardo da Vinci is often credited with drawing the first roller bearing around the year 1500. However, Agostino Ramelli is the first to have published sketches of roller and thrust bearings.An issue with ball and roller bearings is that the balls or rollers rub against each other causing additional friction which can be prevented by enclosing the balls or rollers in a cage. The captured, or caged, ball bearing was originally described by Galileo in the 17th century. The mounting of bearings into a set was not accomplished for many years after that. The first patent for a ball race was by Philip Vaughan of Carmarthen in 1794.
Bearings saw use for holding wheel and axles. The bearings used there were plain bearings that were used to greatly reduce friction over that of dragging an object by making the friction act over a shorter distance as the wheel turned.
The first plain and rolling-element bearings were wood closely followed by bronze. Over their history bearings have been made of many materials including ceramic, sapphire, glass, steel, bronze, other metals and plastic (e.g., nylon, polyoxymethylene, polytetrafluoroethylene, and UHMWPE) which are all used today.
Watch makers produced "jeweled" pocket watches using sapphire plain bearings to reduce friction thus allowing more precise time keeping.
Even basic materials can have good durability. As examples, wooden bearings can still be seen today in old clocks or in water mills where the water provides cooling and lubrication.
The first practical caged-roller bearing was invented in the mid-1740s by horologist John Harrison for his H3 marine timekeeper. This uses the bearing for a very limited oscillating motion but Harrison also used a similar bearing in a truly rotary application in a contemporaneous regulator clock.
A patent on ball bearings, reportedly the first, was awarded to Jules Suriray, a Parisian bicycle mechanic, on 3 August 1869. The bearings were then fitted to the winning bicycle ridden by James Moore in the world's first bicycle road race, Paris-Rouen, in November 1869.
Friedrich Fischer's idea from the year 1883 for milling and grinding balls of equal size and exact roundness by means of a suitable production machine formed the foundation for creation of an independent bearing industry.
The modern, self-aligning design of ball bearing is attributed to Sven Wingquist of the SKF ball-bearing manufacturer in 1907, when he was awarded Swedish patent No. 25406 on its design.
Henry Timken, a 19th century visionary and innovator in carriage manufacturing, patented the tapered roller bearing, in 1898. The following year, he formed a company to produce his innovation. Through a century, the company grew to make bearings of all types, specialty steel and an array of related products and services.
Erich Franke invented and patented the wire race bearing in 1934. His focus was on a bearing design with a cross section as small as possible and which could be integrated into the enclosing design. After World War II he founded together with Gerhard Heydrich the company Franke & Heydrich KG (today Franke GmbH) to push the development and production of wire race bearings.
Richard Stribeck’s extensive research on ball bearing steels identified the metallurgy of the commonly used 100Cr6 (AISI 52100) showing coefficient of friction as a function of pressure.
Designed in 1968 and later patented in 1972, Bishop-Wisecarver's co-founder Bud Wisecarver created vee groove bearing guide wheels, a type of linear motion bearing consisting of both an external and internal 90 degree vee angle.
In the early 1980s, Pacific Bearing's founder, Robert Schroeder, invented the first bi-material plain bearing which was size interchangeable with linear ball bearings. This bearing had a metal shell (aluminum, steel or stainless steel) and a layer of Teflon-based material connected by a thin adhesive layer.
Today ball and roller bearings are used in many applications which include a rotating component. Examples include ultra high speed bearings in dental drills, aerospace bearings in the Mars Rover, gearbox and wheel bearings on automobiles, flexure bearings in optical alignment systems and bicycle wheel hubs.

Overview Of Bearing

Plain bearings use surfaces in rubbing contact, often with a lubricant such as oil or graphite. A plain bearing may or may not be a discrete device. It may be nothing more than the bearing surface of a hole with a shaft passing through it, or of a planar surface that bears another (in these cases, not a discrete device); or it may be a layer of bearing metal either fused to the substrate (semi-discrete) or in the form of a separable sleeve (discrete). With suitable lubrication, plain bearings often give entirely acceptable accuracy, life, and friction at minimal cost. Therefore, they are very widely used.

However, there are many applications where a more suitable bearing can improve efficiency, accuracy, service intervals, reliability, speed of operation, size, weight, and costs of purchasing and operating machinery.
Thus, there are many types of bearings, with varying shape, material, lubrication, principle of operation, and so on. For example, rolling-element bearings use spheres or drums rolling between the parts to reduce friction; reduced friction allows tighter tolerances and thus higher precision than a plain bearing, and reduced wear extends the time over which the machine stays accurate. Plain bearings are commonly made of varying types of metal or plastic depending on the load, how corrosive or dirty the environment is, and so on. In addition, bearing friction and life may be altered dramatically by the type and application of lubricants. For example, a lubricant may improve bearing friction and life, but for food processing a bearing may be lubricated by an inferior food-safe lubricant to avoid food contamination; in other situations a bearing may be run without lubricant because continuous lubrication is not feasible, and lubricants attract dirt that damages the bearings.

Principles of operation


Animation of ball bearing
There are at least six common principles of operation:
  • plain bearing, also known by the specific styles: bushings, journal bearings, sleeve bearings, rifle bearings
  • rolling-element bearings such as ball bearings and roller bearings
  • jewel bearings, in which the load is carried by rolling the axle slightly off-center
  • fluid bearings, in which the load is carried by a gas or liquid
  • magnetic bearings, in which the load is carried by a magnetic field
  • flexure bearings, in which the motion is supported by a load element which bends.

Motions

Common motions permitted by bearings are:
  • Axial rotation e.g. shaft rotation
  • Linear motion e.g. drawer
  • spherical rotation e.g. ball and socket joint
  • hinge motion e.g. door, elbow, knee

Friction

Reducing friction in bearings is often important for efficiency, to reduce wear and to facilitate extended use at high speeds and to avoid overheating and premature failure of the bearing. Essentially, a bearing can reduce friction by virtue of its shape, by its material, or by introducing and containing a fluid between surfaces or by separating the surfaces with an electromagnetic field.
  • By shape, gains advantage usually by using spheres or rollers, or by forming flexure bearings.
  • By material, exploits the nature of the bearing material used. (An example would be using plastics that have low surface friction.)
  • By fluid, exploits the low viscosity of a layer of fluid, such as a lubricant or as a pressurized medium to keep the two solid parts from touching, or by reducing the normal force between them.
  • By fields, exploits electromagnetic fields, such as magnetic fields, to keep solid parts from touching.
Combinations of these can even be employed within the same bearing. An example of this is where the cage is made of plastic, and it separates the rollers/balls, which reduce friction by their shape and finish.

Loads


A block bearing with provisions for fixing it
Bearings vary greatly over the size and directions of forces that they can support.
Forces can be predominately radial, axial (thrust bearings) or Bending moments perpendicular to the main axis.

Speeds

Different bearing types have different operating speed limits. Speed is typically specified as maximum relative surface speeds, often specified ft/s or m/s. Rotational bearings typically describe performance in terms of the product DN where D is the diameter (often in mm) of the bearing and N is the rotation rate in revolutions per minute.
Generally there is considerable speed range overlap between bearing types. Plain bearings typically handle only lower speeds, rolling element bearings are faster, followed by fluid bearings and finally magnetic bearings which are limited ultimately by centripetal force overcoming material strength.

Play

Some applications apply bearing loads from varying directions and accept only limited play or "slop" as the applied load changes. One source of motion is gaps or "play" in the bearing. For example, a 10 mm shaft in a 12 mm hole has 2 mm play.
Allowable play varies greatly depending on the use. As example, a wheelbarrow wheel supports radial and axial loads. Axial loads may be hundreds of newtons force left or right, and it is typically acceptable for the wheel to wobble by as much as 10 mm under the varying load. In contrast, a lathe may position a cutting tool to ±0.02 mm using a ball lead screw held by rotating bearings. The bearings support axial loads of thousands of newtons in either direction, and must hold the ball lead screw to ±0.002 mm across that range of loads.

Stiffness

A second source of motion is elasticity in the bearing itself. For example, the balls in a ball bearing are like stiff rubber, and under load deform from round to a slightly flattened shape. The race is also elastic and develops a slight dent where the ball presses on it.
The stiffness of a bearing is how the distance between the parts which are separated by the bearing varies with applied load. With rolling element bearings this is due to the strain of the ball and race. With fluid bearings it is due to how the pressure of the fluid varies with the gap (when correctly loaded, fluid bearings are typically stiffer than rolling element bearings).

Service life

Fluid and magnetic bearings can have practically indefinite service lives. In practice, there are fluid bearings supporting high loads in hydroelectric plants that have been in nearly continuous service since about 1900 and which show no signs of wear.
Rolling element bearing life is determined by load, temperature, maintenance, lubrication, material defects, contamination, handling, installation and other factors. These factors can all have a significant effect on bearing life. For example, the service life of bearings in one application was extended dramatically by changing how the bearings were stored before installation and use, as vibrations during storage caused lubricant failure even when the only load on the bearing was its own weight;the resulting damage is often false brinelling. Bearing life is statistical: several samples of a given bearing will often exhibit a bell curve of service life, with a few samples showing significantly better or worse life. Bearing life varies because microscopic structure and contamination vary greatly even where macroscopically they seem identical.
For plain bearings some materials give much longer life than others. Some of the John Harrison clocks still operate after hundreds of years because of the lignum vitae wood employed in their construction, whereas his metal clocks are seldom run due to potential wear.
Flexure bearings bend a piece of material repeatedly. Some materials fail after repeated bending, even at low loads, but careful material selection and bearing design can make flexure bearing life indefinite.
Although long bearing life is often desirable, it is sometimes not necessary. Harris describes a bearing for a rocket motor oxygen pump that gave several hours life, far in excess of the several tens of minutes life needed.
Bearings are often manufactured to what is called an "L10" life factor.

Maintenance

Many bearings require periodic maintenance to prevent premature failure, although some such as fluid or magnetic bearings may require little maintenance.
Most bearings in high cycle operations need periodic lubrication and cleaning, and may require adjustment to minimise the effects of wear.
Bearing life is often much better when the bearing is kept clean and well-lubricated. However, many applications make good maintenance difficult. For example bearings in the conveyor of a rock crusher are exposed continually to hard abrasive particles. Cleaning is of little use because cleaning is expensive, yet the bearing is contaminated again as soon as the conveyor resumes operation. Thus, a good maintenance program might lubricate the bearings frequently but clean them never.

Bearing (mechanical)

A bearing is a device to allow constrained relative motion between two or more parts, typically rotation or linear movement. Bearings may be classified broadly according to the motions they allow and according to their principle of operation as well as by the directions of applied loads they can handle.




Monday, 7 March 2011

Piston Pump - Construction


A Piston Pump is very similar in construction to a Reciprocating Internal Combustion Engine. The basic pumping action is obtained by reciprocation of a piston in a cylinder. The cylinder has two valves, one inlet and one outlet valve. And they allow for only inwards and outwards movement of the liquid respectively. These valves are situated in inlet and outlet manifold respectively. The piston is connected to a crankshaft through a connecting rod. The Piston Pump has a liner made of leather or any other synthetic material to provide proper sealing between the moving surfaces of the piston and the cylinder.

 Piston Pump - Working

The reciprocating action of the piston is obtained by crankshaft arrangement and guide path provided by the cylinder. The piston is connected to the crankshaft through the connecting rod which is coupled with the crankshaft through a revolute joint situated at some distance from the crankshaft axis. This distance can be called as crank length or the eccentric distance. It is this crank length which determines the stroke length of a piston pump.
The crankshaft is coupled to an electric motor or an engine shaft. As the crankshaft rotates the piston reciprocates. In one cycle of the crankshaft the piston reciprocates once, that is, moves one stroke forward and one backward. The intake and discharge of the liquid by a piston pump is basically the same as reciprocating pumps in general as discussed in previous article under working of reciprocating pumps.

Piston Pump - Variants

The basic Piston Pump has single piston cylinder arrangement with intake and discharge of liquid through one side only. Piston Pumps are available is different configuration and each being suitable for particular application. The discharge of a piston pump can be changed by varying the stroke length of the piston. The common variants of the Piston or Plunger Pumps are:
Single Acting Piston Pump 
Having liquid chamber on only one side of the piston and valve arrangement on that side only. The liquid is discharged from one side of the cylinder once in a crankshaft cycle, only in the forward stroke of the piston.
Double Acting Piston Pump 
Both sides of the piston have liquid chamber and the valve arrangement. Liquid is discharged from both the sides, from one side in the first half of the cycle and from the other side in the second half of the crankshaft cycle. As the liquid is discharged in both the forward and backward stroke, the discharge is more per cycle and also smooth as compared to the Single Acting pump.
Duplex Pump 
There are two piston-cylinders assemblies. Both the pistons are coupled to the single crankshaft through separate connecting rod of each. The connecting rods are coupled to the crankshaft at an angular distance of 180 degrees from each other. Each piston-cylinder can be single acting or double acting.
Triplex Pump  
There are three piston-cylinder assemblies. All the three pistons are coupled to the single crankshaft through the connecting rod of each. There is an angular separation of 120 degrees between any two adjacent connecting rod and crankshaft couplings.

Classification Criterion

The most basic classification criterion for differentiating the pumps, whether it is for purpose of analysis or for commercial purpose, is the fluid flow pattern. There are also other important classifications based on the power rating range and fluid discharge rate. The flow supplied by a pump can be intermittent or continuous. The pumps with intermittent flow are all positive displacement pumps and pumps with continuous flow are all Roto-Dynamic pumps. These classifications of the pumps does not end here, these two broad categories have further different types of pumps having varying characteristics. To sum up the classification criterion:
Broad categories based on Flow Pattern:
  1. Intermittent - Positive Displacement Pumps
  2. Continuous - Roto-Dynamic or Turbo Pumps

Positive Displacement Pumps

Positive displacement, as the name suggests, is displacing something positively, that is, certain fixed quantity is displaced. In case of the fluid pumps that “something” is fluid for sure. Positive displacement of a fluid is that a closed volume of the fluid is moved from one part of the machine to the other part. The construction of the positive displacement pumps is such that the moving parts along with the fixed ones inside it can form moving enclosed volumes. They open on one side, take the fluid, enclose it and open on the other side, discharging the fluid.
Positive Displacement pumps can further be classified under subcategories according to the motion pattern of the enclosed volume forming parts.
Reciprocating Positive Displacement PumpsIn the reciprocating positive displacement pumps the moving part forming the enclosed volume for fluid displacement has a reciprocating motion. Reciprocating pumps are mainly of two types based on the reciprocating part.
  • Piston Pump
  • Diaphragm Pump
Each type of these reciprocating pumps is available with various different features. Different variants of positive displacement pumps reciprocating pump are single discharge, double discharge, duplex and triplex.
Rotary Positive Displacement Pumps
Rotating positive displacement pumps have rotating parts which form the moving cavity for carrying the fluid from one side and discharging it at the supply side. Rotary positive displacement pumps are of mainly two types based on the number of rotors.
  • Single Rotor
  • Multiple Rotor
Each of these two types of Rotary Positive Displacement Pump has pumps available with different design features. Screw Pumps and Gear Pumps are most common Rotary Positive Displacement Pumps.

Roto-Dynamic or Turbo Pumps

Roto-Dynamic or Turbo Pumps are similar in construction as the Hydraulic Turbines just the functioning is opposite to them. Turbo Pumps has rotating impellers with blades or vanes fixed to a rotating shaft. The flow is continuous through the Turbo Pumps. Like turbines turbo pumps are also mainly of two types based on flow direction.
Axial Flow Pumps
The coming articles on fluid pumps will provide information about each type of pumps their construction, working and different features.

Basic Concept of a Pump


A pump in general is a machine which imparts energy to anything flowing through it. This can be any fluid, heat or even electrons. The devices pumping heat are called as heat pumps and electrical batteries can pump electrons. The spontaneous tendency of anything is to flow from high potential to low potential and this natural tendency is harnessed in many applications. But the pump does exactly the reverse; it forces something to move from low potential to high potential. For this purpose pumps use energy and by their functioning that transfer that energy to the substance flowing through them.
Fluid pumps or Hydraulic pumps move fluids and displace them from one position to another and in course energizes them. In fluids this energy is manifested as its pressure and velocity. Similarly, heat pumps move heat from low temperature to high temperature against its natural tendency to flow from high temperature to low temperature. An electrical battery is also a type of pump; it pumps electrons in a circuit from low electrical potential to high electrical potential which is against the spontaneous tendency of electrons to move from high electrical potential to low electrical potential. Hence, an electrical battery can be called as an Electron Pump.

Hydraulic Pump Construction

Basically a fluid pump or hydraulic pump is a device or machine having moving mechanical components which uses energy from some source, generally electrical, supplied to it in form of mechanical energy by electrical motor.
Generally pumps have rotating parts run by the electrical motors. The rotating parts of pumps can be some volume defining components which can form an enclosed envelope of volume where the fluid can captured and displaced. Other type of rotating parts can be blades mounted on discs or shafts which rotate with the driving power and transfers that to the fluid by making it move with increased velocity.

 

 

Basic Working Principle

In simple words we consider a pump to be a black box to understand its working. Fluid enters a pump at certain velocity and pressure, which may be even zero, and leaves it with increased energy, that is, velocity and pressure. For this a pump consumes a certain amount of energy from any external source. Now, what is happening inside that black box? There are rotating components inside which move the fluid either by confining it in definite volumes and then displacing it or by imparting energy to the fluid by dynamic action of the moving parts and increasing velocity and pressure of the fluid.

History

In 1772 John Whitehurst of Cheshire in the United Kingdom invented a manually controlled precursor of the hydraulic ram called the "pulsation engine". The first one he installed, in 1772 at Oulton, Cheshire, raised water to a height of 16 ft (4.9 m).He installed another in an Irishproperty in 1783. He did not patent it, and details are obscure, but it is known to have had an air vessel.
The first self-acting ram pump was invented by the Frenchman Joseph Michel Montgolfier (best known as a co-inventor of the hot air balloon) in 1796 for raising water in his paper mill at Voiron. His friend Matthew Boulton took out a British patent on his behalf in 1797. The sons of Montgolfier obtained an English patent for an improved version in 1816, and this was acquired, together with Whitehurst's design, in 1820 byJosiah Easton, a Somerset-born engineer who had just moved to London.
Easton's firm, inherited by his son James (1796–1871), grew during the nineteenth century to become one of the more important engineering manufacturers in the United Kingdom, with a large works at Erith, Kent. They specialised in water supply and sewerage systems world-wide, as well as land drainage projects. Eastons had a good business supplying rams for water supply purposes to large country houses, and also to farms and village communities, and a number of their installations still survived as of 2004.
The firm was eventually closed in 1909, but the ram business was continued by James R Easton. In 1929 it was acquired by Green & Carter of Winchester, Hampshire, who were engaged in the manufacturing and installation of the well-known Vulcan andVacher Rams.

HYDRAULIC PUMPS


Hydraulic Pumps deliver high-pressure fluid flow to the pump outlet. Hydraulic pumps are powered by mechanical energy sources to pressurize fluid. A hydraulic pump, when powered by pressurized fluid, can rotate in a reverse direction and act as a motor. Operating specifications, housing materials, and features are all important specifications to consider when searching for hydraulic pumps. Pump type and pump stages are the most important operating specifications to consider when searching for hydraulic pumps. Choices for hydraulic pumps types include axial piston, radial piston, internal gear, external gear, and vane. An axial piston pump uses an axially-mounted piston to pressurize fluid. Mechanical motion from the pumps power source moves the piston through a chamber, pressurizing the fluid it comes in contact with.
      A radial piston pump uses pistons mounted radially about a central axis to pressurize fluid. An alternate-form radial piston motor uses multiple interconnected pistons, usually in a star pattern. The hydraulic pumps power source causes the pistons to move, forcing the pistons through the chambers and pressurizing fluid. An internal gear pump uses internal gears to pressurize fluid. The pumps power source causes the internal gears to turn, which forces fluid through the pump outlet. An external gear pump uses external gears to pressurize fluid. The pumps power source causes external gears to turn, which forces fluid through the pump outlet. A vane pump uses a vane to pressurize fluid. The pumps power source causes the vane to rotate. As the vane rotates, blades on the vane push fluid out the pumps outlet.
      Pump stages include single stage, double stage, triple stage, and four or more pump stages.Additional operating specifications to consider for hydraulic pumps include continuous operating pressure, maximum operating pressure, operating speed, operating horsepower, operating temperature, maximum fluid flow, maximum fluid viscosity, displacement per revolution, and pump weight. The continuous operating pressure is the maximum pressure available at the pump outlet. The maximum operating pressure refers to the maximum peak pressure available at the pump outlet on a noncontiguous (intermittent) basis. The operating speed is the speed at which the pumps moving parts rotate is expressed in revolutions per minute, or similar terms.
The operating horsepower is the amount of power the pump is capable of delivering. Horsepower is dependent on the pressure and flow of the fluid through the pump. The operating temperature is the fluid temperature range the pump can accommodate.                   Maximum and minimum fluid temperature is dependent upon internal component materials, and varies greatly between manufacturers. The maximum volumetric flow through the pump is expressed in terms of gallons per minute, or similar units. The maximum fluid viscosity the hydraulic pump can accommodate is a measure of the fluids resistance to shear, and is measured in centipoise. Centipoise is a common metric unit of dynamic viscosity equal to 0.01 poise or 1 millipascal second.
   The dynamic viscosity of water at 20 degrees C is about 1 centipoise. The correct unit is cP, but cPs and cPo are sometimes used. The fluid volume displaced per revolution of the pump is measured in cubic centimeters (cc) per revolution, or similar units. The weight of the hydraulic pump is measured in pounds or similar units.
 


PUMP DEFINITION


A machine that draws a fluid into itself through an entrance port and forces the fluid out through anxA machine that draws a fluid into itself through an entrance port and forces the fluid out through an exhaust port (see illustration). A pump may serve to move liquid, as in a cross-country pipeline; to lift liquid, as from a well or to the top of a tall building; or to put fluid under pressure, as in a hydraulic brake. These applications depend predominantly upon the discharge characteristic of the pump. A pump may also serve to empty a container, as in a vacuum pump or a sump pump, in which case the application depends primarily on its intake characteristic.haust port (see illustration). A pump may serve to move liquid, as in a cross-country pipeline; to lift liquid, as from a well or to the top of a tall building; or to put fluid under pressure, as in a hydraulic brake. These applications depend predominantly upon the discharge characteristic of the pump. A pump may also serve to empty a container, as in a vacuum pump or asump pump, in which case the application depends primarily on its intake characteristic.